killoalerts.blogg.se - Motorola radio programming kit

Motorola radio programming kit how to#
Motorola radio programming kit install#
Motorola radio programming kit code#

Select call tone 8 or 4 for Vibra call or call tones between 1,2, 3, 4 for audible call tones

press (+) or (-) to hear and select the call tone.

When the Vibra call feature is turned on, the vibra signal is displayed on the radio. The Vibra call feature is an additional option on the call tone. Vibra call on the other hand allows your radio vibrate when it receives especially if you haven’t transmitted in the last 30 seconds. The call tone is factory set to 0 (turned off) but you can change the setting to a preferred call tone. You can set your radio to transmit call tones to other radios in your group to alert them especially if you want to transmit.

Press and hold Push to talk button to exit programming or MENU to continue programming.

(note that the radio retains settings for the channels made unavailable, therefore you can go to the settings and make them available anytime you want to.

Press (-) or (+) to select the number of available channels you want.

Press MENU until CH displays and the channel number flashes.

You can reduce the number of channels on your radio if you need fewer channels.

Press and hold the PTT button to exit programming or MENU to continue programming.

Motorola radio programming kit code#

Press MENU until CODE displays and the code number flashes.

If not, press down the Push to Talk button and MON together until you see the PROG sign on the display.

Motorola radio programming kit how to#

To program the code, I’m sure by now you know how to enter the programming mode. The interference eliminator code helps provides you with codes that filter out static, noise or unwanted messages thus minimizing interference on your walkie-talkie either while transmitting, receiving or on standby. Programming the interference Eliminator code Press the Push to Talk to exit programming or press MENU to continue programming. To program in the frequency 1, in programming mode, press MENU intil 1 displays and the frequency number flashes 2. Press and hold Push to Talk (PTT) to exit programming mode or press MENU to continue programming. Press (-) or (+) to select the channel 3.(note that channel selection is the first setting after you enter the programming mode.) While in programming mode, press MENU until the channel number flashes and the frequency and code display off and on.In a simpler way, push down the push to talk (PTT) button together with the button underneath it firmly, and turn the radio on, it gives a beep sound with a flashing green light. The channel number flashes on the display, the frequency (indicated by FREQ) and code (indicated by CODE) will alternately display.Įnsure that you hold down the PTT button when programming, if you press and release the PTT button during programming, it takes you back to the program page thereby losing all what you have programmed. The radio will make a beep sound and display the PROG sign. Press and hold the Push to Talk (PTT) and MON button for 3 seconds while turning on the radio. To enter the programming mode on your device, make sure your radio is fully charged. Microphone gain at frequency 2 (medium sensitivity). Operating frequency configuration (from a pre-programmed frequency list)īy default, your Motorola radio is programmed to these settings Ĭhannel 1- 8 each with its corresponding frequency from 1-8.The programmable settings on your walkie-talkie include We will only program up to 16 channels and do not program for trunking systems.Your Motorola radio programming mode allows you to change some settings while others are left unchanged as they are non-programmable. NOTE: If your order needs programming services, please enter your programming details in “Special instructions for seller” field during checkout.

Motorola radio programming kit install#

DTMF (Encode) - Decode available with Option Board and Install Kit.MDC1200 Selective Radio Inhibit (Decode).

MDC1200 PTT-ID (Alphanumeric ID-Encode/Decode).User Programmable Scan Programmable Buttons:.

12.5/25 kHz Switchable Channel Spacing (VHF/UHF).20/30 kHz Switchable Channel Spacing (Low Band).Unit comes complete with palm mic and mounting bracket and new power cable.